APEX ORIN NX II Data Collection#
Data Presentation#
Functions#
When the device is connected to a network, the functions and settings used through MIIVII SETTINGS are recorded.
The collected data uses the following format:
Field |
Type |
Overview |
Example |
|---|---|---|---|
id |
uuid |
Data ID |
c9095ea4-3b42-11ee-acfc-0242ac110005 |
ip |
string |
websettings ip |
112.25.246.30 |
create_time |
date |
Data insertion time (operation time) |
2023-08-15 08:07:32.177885 |
miivii_release |
varchar(50) |
MIIVII release version |
5.1.1-2.0.0.9 |
module_name |
varchar(50) |
Module name |
ORIN |
product_name |
varchar(50) |
Product name |
MIIVII APEX AD10 |
sn |
varchar(50) |
Device serial number |
12345678900 |
op |
varchar(50) |
Operation identifier |
GMSL Set |
op_param |
|
Operation parameters (the structure varies by operation) |
[{“group”:”VIDEO0”,”id”:”MVG2CB-001A”,”type”:0,”max_set_time”:120},{“group”:”VIDEO1”,”id”:”MVG2CB-001A”,”type”:0,”max_set_time”:120},{“group”:”VIDEO2”,”id”:”MVG2CB-001D”,”type”:0,”max_set_time”:120},{“group”:”VIDEO3”,”id”:”MVG2CB-001A”,”type”:0,”max_set_time”:120},{“group”:”VIDEO4”,”id”:”MVG2CB-001A”,”type”:0,”max_set_time”:120},{“group”:”VIDEO5”,”id”:”MVG2CB-001A”,”type”:0,”max_set_time”:120},{“group”:”VIDEO6”,”id”:”MVG2CB-001A”,”type”:0,”max_set_time”:120},{“group”:”VIDEO7”,”id”:”MVG2CB-001A”,”type”:0,”max_set_time”:120}] |
Parameters for Each Operation:
The operation identifier (op) corresponds to the English name of the product function. |
Overview |
Parameter Data (JSON) |
Parameter Details |
|---|---|---|---|
GMSL Set |
Configure GMSL |
[{“group”:”VIDEO0”,”id”:”MVG2CB-001A”,”type”:0,”max_set_time”:120}] |
group: device channel id: camera model (defined by MIIVII) type: vendor identifier (no longer used for GMSL2) max_set_time: maximum configuration timeout |
Set Vol output |
Configure GPIO |
{“hasvol”:true,”volout”:{“Platform”:”MIIVII”,”cfg_version”:””,”VolOut”:”24”,”Vols”:[“0”,”24”,”12”,”5”,”3.3”]}} |
hasvol: whether to display GPIO Platform: unused cfg_version: unused VolOut: current configured value (the main parameter to check) Vols: available values |
External timing mode |
Configure the External Time Synchronization Method |
{“saved_type”:2,”SyncOutParams”:[{“params_id”:”freq”,”saved_value”:25}]} |
saved_type: current synchronization method; 0: NONE, 1: NTP, 2: GPS params_id: external trigger identifier, freq or freqa saved_value: external trigger frequency |
Sync Out1 |
Configure Sync Out1 |
{“saved_type”:2,”SyncOutParams”:[{“params_id”:”freq”,”saved_value”:25}]} |
Same as above |
Check Upgrade |
Select an Upgrade to a New JetPack Version |
{“isUpdateAptSrc”: false} |
true: upgrade the JetPack version false: minor version update |
System Upgrade |
System Update |
None |
|
Log Export |
Export Logs |
None |
|
Docker private repository |
Set the Docker Trusted Repository Address |
{“url”:”http://harbor.miivii.com”} |
url: container registry address |
WeChat Binding |
Scan a QR Code to Bind a User |
{username: “xxx”,result:0} |
WeChat username: username token: WeChat token result: 0: “Binding successful”, 1: “The QR code has expired. Refresh the page and try again”, 6: “Binding failed” |