Apex Dual Orin Power Mode#

Description#

The device’s default setting is MAXN mode.

Power mode settings give users flexibility in controlling overall power consumption. This allows users to flexibly set power consumption according to different scenarios.

Set by GUI#

  • Select the green icon in the upper right corner.

  • Select power mode.

Set by Command line#

sudo /usr/sbin/nvpmodel -m <power mode>
#e.g. sudo /usr/sbin/nvpmodel -m 0，set power mode to MAXN.

Check status through GUI#

Select Jetson Power GUI, get the detail information from popup window.