Apex Dual Orin 1G Ethernet

Gigabit Ethernet Usage

Hardware Connection

MiiVii Device(Female)

Cable(Male)

Preconditions

1 Confirm the Gigabit Ethernet port location. 1 Make sure to use a A-Code M12 to RJ45 network cable. 1 Insert the Gigabit Ethernet network port to use. 1 Use RJ45 through a switch or directly connect to a router.

Gigabit Ethernet network device mapping relationship

Since Gigabit Ethernet is extended through switches, on Orin, all Gigabit Ethernet ports connected to Orin can be accessed through the network device name.

Master Orin network device	Accessible network interface	Slave Orin network device	Accessible network interface
eth1	M_LAN0, M_LAN1, M_LAN2, M_LAN3	eth1	S_LAN0, S_LAN1, S_LAN2, S_LAN3
eth2	M_LAN0, M_LAN1, M_LAN2, M_LAN3	eth2	S_LAN0, S_LAN1, S_LAN2, S_LAN3

Usage

It should be noted that since eth1 and eth2 get 4 network interfaces through the expansion of the switch, it is necessary to avoid the connection method that will cause network storms.

Connection Suggest (Good)

Connection will cause problem (NG)