Apex Xavier II+ 4G Usage#

Hardware Selection#

Installation of 4G module and SIM card.#

Remove the bottom panel.

Installation

Antenna installation#

Start-up settings#

The built-in driver of Miivii does not need any additional configuration, it is in the state of automatic startup and automatic dial-up.

Module configuration method#

Please note that if you are using an IoT SIM card, there will be a problem that the SIM card is bound to the device hardware, please confirm with the communication provider in advance.

The corresponding module drivers are integrated in the Mivin system image. After the module is installed, the system will automatically recognize it.

In the network connection icon at the top right of the desktop, find Mobile Broadban Settings.

Add new connection.

Select Next.

Choose your country.

According to the SIM card, choose the corresponding carrier, eg  China Mobile, China Unicom.

Select operator according to SIM card.

Choose your plan. This item is selected by default, just click Next.

Check the created information, if correct, click Apply.

Set user name and password, click save.

After the network is created, select the newly created network connection from the network connection icon at the top right of the desktop, and you can go online normally.

Mini PCIe 4G Support List#

NO.

Brand

Product NO.

Interface

Module function

Operating temperature

Spec

Note

1

Quectel

EC20-CEHCLG-MINIPCIE-CB

Mini PCIe 

4G

-40ºC - 80ºC

  Speed: Max 130Mbps (Download)/Max 30Mbps (Upload)