APEX ORIN NX WIFI Usage#
WIFI Module Installation:#
Shell Disassembly：#
Step1: Remove front screw.
Step2: Remove back screw.
Step3: Remove side screw.
Installation Steps:#
1.WiFi module mounted on the seat of the PCIE, lock attached to 1 M3 * 6 Phillips with rubber screws
2.Put the antenna adapter cables, IPEX interface snap on the WIFI module, SMA interface female connector fixed to the device antenna interface
3.Fix the antenna to the antenna connector of the device.
Reference Photos：#
Required accessories:#
WIFI module x1
M3*6 Phillips with adhesive screws x1
IPEX to SMA antenna adapter x2
Notes：#
The Wifi module of Apex Orin NX does not support Bluetooth function.
Wireless Setting#
WiFi Setting#
Click the network icon in upper-right corner of the desktop. Find the name of your WiFi network and click on it. Enter your password and click ‘Connect’.
WiFi Connection
M.2 E WIFI Support List#
NO. |
Brand |
Product NO. |
Interface |
Module function |
Operating temperature |
Standard |
Spec |
Note |
|---|---|---|---|---|---|---|---|---|
1 |
Azurewave |
AW-CB375NF |
M.2 E KEY |
WIFI+BT |
0°C~70°C |
IEEE 802.11 a/b/g/n/ac and Bluetooth 5.0 |
2.4 GHz:2.412 ~ 2.484 GHz 5 GHz:4.915 ~5.925GHz |